Orders Submitted by 2pm Ship Out Same Day!

Wire Shield – Protective Sleeve for Underwater Fish Light Wire



Protect Your Wire in Heavily Fished Waterways

Slips Easily Over Your Underwater Wire to Protect Against Fish Hooks or Hazardous Sea Floor Conditions Such as Oyster Beds

While our systems are built tough to withstand even the harshest marine conditions, there are some heavily fished waterways in the country that have a problem with inconsiderate anglers hooking into the wires of underwater lights.

This heavy-duty protective sleeve is made right here in the USA and available in lengths from 20-50 feet and easily slips over your wire to protect it in heavily fished areas or waterways with sharp rocks or debris on the seafloor.
Customers may wish to purchase a short section to protect the wire near the bulb or select a longer length for additional coverage.   For those looking to protect their entire length of wire, we have heavily discounted our 50 ft sections.
Installation Note: For 99% of all installations, the light assembly should be positioned within 1 to 3 inches above the weight. Keeping the light as low as possible in the water column not only keeps it safe from boat propellers but also gives the best results in most waterways. Cutting a short piece of this tubing to cover the area between the light assembly and weight will offer extra protection against anglers hooking into the wire.


Lengths of this protective sleeve can be cut down to fit your exact needs, or combined for extended wire length systems.
Orders including wire shields will receive ties to secure the sleeve to your wire. One tie per foot will be included.

Additional information

Weight 1 lbs
Dimensions 5 × 5 × 5 in
Select Wire Shield Length

20ft, 30ft, 50ft


There are no reviews yet.

Be the first to review “Wire Shield – Protective Sleeve for Underwater Fish Light Wire”

Your email address will not be published. Required fields are marked *

Don't Leave Us!

Use The Code Below For $20 Off Your Purchase Of A Dock Light System!